How to use The Amazing Camera
 Carefully read the operating instructions in your Sony handbook.
Ensure that both cameras are in the "camera mode".
Push the power button on the RIGHT camera. Both cameras will now power up.
Compose your image using the 2 LCD displays.
If you require flash, use the flash options on BOTH cameras.
Press and hold the shutter halfway down to focus. If the green dots on the LCD display stop blinking, the camera is ready for shooting.
 |
Press the shutter button fully down to take the picture.
Check the image you have taken on the LCD displays. If you are not happy with the result try again. Do not erase images on your cameras. Erase images only on your computer because otherwise picturecounting on your cameras get mixed up.
After shooting your images push the power button on the right camera to shut down.
Tips for good 3D results
Remember to hold both cameras in a horizontal position.
Allow a minimum of two metres between the front of the camera and your subject
|
Avoid using flash where possible.
If you need any of the special features of these cameras please remember to set the options on BOTH cameras.
If the batteries of one camera are empty you should replace all batteries of BOTH cameras.
For both cameras select imagesize 2.0M (not VGA)
Don't worry if your first attempts are not successsfull. Remember: only practice makes perfect!
|
